What Is Control Valve? Types Of Valve.

What Is Control Valve? Types Of Valve.

 

The Control Valve, which is worked by varying the size of the flow passage, as operated by the external electrical, Pneumatic, or hydraulic control signal from a controller and used to control the fluids flow control, level control, pressure control, temperature control, quantity measure, etc in Ammonia Process, Basic Process, Chemical Engineering, Chemical Process Technology, Chemical Industries, Lubricant Manufacturing, Manufacturing Industries, Oil and Gas, Petrochemicals, Power Generation plant.

https://techproces.com/
https://techproces.com/

 

# The Control valve has 3 basic Components:-

01. Actuator Most actuators are pneumatic. Usually, an actuator works with the help of a diaphragm and instrument air. This is the device that positions the throttling element (i.e., the valve plug inside the valve body).

02. Valve body subassembly This is the part where the valve plug, valve seats, and valve casing are located.

03. Accessories These include positioners, I/P (current- to-pressure) transducers, and position sensors. 

# 2 types of control valves are based on their motion:-

01. Linear-Motion valves as-

A –  Gate Valves.

B – Diaphragm Valves.

C – Globe Valves.

02. Rotary Motion valves as-

A – Butterfly Valves.

B – Ball Valves.

C – Plug Valves.

# The Control Valve Actuator accepts a signal from an external source and, in response, positions (opens or closes) the valve to the position required or designed. Control Valve actuators enable remote operation of control valves.

# Actuators can be moved into position by either:-

01. Hydraulic signal,

02. Air/Gas signals or,

03. Electric signals.

# Typical control valve position commands include:-

01. More Closed,

02. More Open,

03. Fully closed and

04. Fully Open.

# According to the power supply required 3 Types of CVs:-

01. Pneumatic valve actuators.

02. Electric valve actuators.

03. Hydraulic valve actuators.

 

Please take a look at the following links:

Question With Answer About Turbine And Compressor In Process Industries 02.

Question With Answer About Turbine And Compressor In Process Plant 01.

What Is Compressor And Compression System? Working Principle Of Compressor

What Is Strainer? Types of the strainer.

What Is Lubricant And Properties Of Lubricant?

The Steam Turbine, And How It Works?

What Is Rupture Disc, How It Work?

What is Critical Point, Surge Point, Yield Point, Aniline Point, Triple Point, Triple Point Of Water, Melting Point, Auto Ignition Point?

What Is Fire Point, Smoke Point, Freezing Point, Dew Point, Flash Point, Pour Point, Boiling Point, Bubble Point?

Different Type Of Boiler. Boiler Operation And Operation Coefficient.

Pump Cavitation And Prevention.

Pumps & How It Works?

Centrifugal Pump & Troubleshooting.

Let’s We Know About What Is Seal And Types Of Seals.

Personal Protective Equipment (PPE). Types Of PPE.

Safety Measures Associated With Confined Space.

Explosion Hazard And How To Prevent It?

How To Prevent Fire Hazards In The Workplace?

Accident And Its Prevention In Work Place.

Occupational Hazard And Safety Requirements In Industries.

What Is Gas Hydrate? How To Prevent It?

What Is Filter Or Separator? Types Of Filters.

Let’s Know About Plumbing Fittings Or Pipe Fittings.