static-vessels-and-towers/ static-vessels-and-towers/

Static Vessels And Towers। Static Equipment In Industries..

Static Vessels And Towers। Static Equipment In Industries.


Static Vessels And Towers। Static Equipment In Industries are significant pieces of equipment in any type of processing plant. There is no place such as in Ammonia Process, Basic Process, Chemical Engineering, Chemical Process Technology, Chemical Industries, Lubricant Manufacturing, Manufacturing Industries, Oil and Gas, Petrochemicals, where not need to the Static Vessels And Towers.

In a chemical plant any piece of equipment that contains a Liquid, Gas, or Solid, may be called a “Vessels”. A Vessel can be any size or shape. The position of the vessels may be horizontal or vertical. 

There are some examples of Static Vessels and Towers that are commonly used in various petrochemical and chemical plants.

Packed Tower, Bubble Tower, Column, Ion Exchange Tower, Chamber, Tank, Digester, Reactor, Pan, Drum, Heat Exchanger, Stripper, Converter, Cooler, Absorber, Desorber, Deaerator, Dehumidifier, Chiller, Re-boilers, Boilers, Air Cooler, Heater, etc.

Here is a description of some of the Static Vessels And Towers in the above examples.

Packed Tower:

Column and Towers are sometimes filled with an inert material referred to as “Packing”. When a tower has been filled with “Packing”, It is called a Packed Tower. static-vessels-and-towers/ static-vessels-and-towers/

Bubble Tower:

Columns and towers are sometimes equipped with Bubble Cap Tray or Ballast Tray as “distributors” to bring liquid and vapor into close contact are called Bubble Tower.

Extraction Column:

Vertical process vessel in which desert product is separated from a liquid by counter-current contact with a solvent in which the desired product is preferentially soluble.

Ion Exchange Tower:

Ion Exchange Tower is an ion-exchange column where dissolved mineral salts in water are removed by exchanging ions with the aid of ion exchange (resin). 


The absorber is equipment in which a gas is absorbed by contact with a Liquid. An absorber may contain one or more Packed Towers and Bubble Towers. ​A solid or liquid that absorbs another substance is called an Adsorbent.


December is equipment in which the process of removing an absorbed gas as absorbed by a liquid or liquid is performed. A Desorber also may be arranged with one or more Packed Towers and Bubble Towers.


An auxiliary heating unit for a fractionation tower is designed to supply additional heat to the lower portion of a tower. Liquid withdrawn from the side or bottom of the tower is preheated by heat exchange, then introduced into the tower. It also works like a Heat Exchanger.


The Deaerator (DA) tank uses steam to preheat boiler feedwater to a temp. at which dissolved O2 & CO2 will become separated from the feedwater before it is pumped to the boiler. The purpose is to protect the boiler and steam/condensate piping from corrosion that would be present when the water evaporates into steam. An additional benefit is that the number of chemicals used to treat the boiler water can be reduced. static-vessels-and-towers/ static-vessels-and-towers/


A reactor is a static device or a process vessel, in which a chemical reaction takes place during a chemical conversion type of process. A reactor vessel catalyst or non-catalyst can be of two types, i.e. reaction can occur in the presence and absence of a catalyst.

Pressure Vessels Codes:

Governing authorities established or adopts Safety Codes And Standard Rules for boiler and pressure vessels.

Governing Authorities:

Governing authorities are:

Inspection Of Vessels:

  • Welding Joints,

  • Corrosion / Erosion,

  • Wall Thickness,

Method Of Inspection:

Safety Devices For Vessels And Towers:

A “Safety Relief Valve” is a safety device used to release excess pressure in a vessel or pipeline. A “Safety Relief Valve” will open if the pressure becomes greater than the set point. A “Safety Relief Valve” is also called a “pop” valve. Another device is used to prevent damage to equipment is a “Rupture Disc“. A rupture disc is made to rupture at any Desert pressure. “Rupture Disc” is a safety device installed on equipment to release excess pressure. Two-Rupture Disc is sometimes installed on equipment to protect it.

Please take a look at the following links:

The Steam Trap And How It Work?

What Is Control Valve? Types Of Valve.

Difference Between Pressure Safety Valve and Pressure Relief Valve.

What Is Strainer? Types of a strainer.

What Is Lubricant And Properties Of Lubricant?

The Steam Turbine, And How It Works?

What Is Rupture Disc, How does It Work?

What is Critical Point, Surge Point, Yield Point, Aniline Point, Triple Point, Triple Point Of Water, Melting Point, Auto Ignition Point?

What Is Fire Point, Smoke Point, Freezing Point, Dew Point, Flash Point, Pour Point, Boiling Point, Bubble Point?